Use your 20' or 25' Flagpole to create a brilliant Christmas Tree Light Display!

Powder coated aluminum “Hitch Mount.” The end that fits into the receiver is 15″ long and is a 2″x2″ square (outside measurement). The hole for the pin is 5/8″ in diameter.

Powder coated aluminum “Side Mount”. Can be used to mount on the side of a boat dock, wood deck, retaining wall, tongue of a trailer, or other vertical attachment locations.

Powder coated aluminum “Top Mount”. This can be attached to any horizontal surface. Concrete, wood, RV tongue.

Honor the memory of those who have served your community with these attractive grave markers. Each marker has a traditional design, 21" rod, 6" diameter and can accommodate a 12" x 18" spearhead flag (sold separately).

Honor the memory of those who have served your community with these attractive grave markers. Each marker has a traditional design, 21" rod, 6" diameter and can accommodate a 12" x 18" spearhead flag (sold separately).

ABS plastic ground sleeve with red cap and stop bolt. Measurement is inside diameter of sleeve.
Please indicate if you wish to have a 2.5" or a 3.0".

Maine's first flag, adopted in 1901, buff colored, an unusual but distinctive choice. It featured the great pine tree in its proper color green and near the upper hoist corner was the North Star in blue.

The traditional six stripe pride flag design popularized by artist Gilbert Baker in 1978.

ABS plastic sleeve 12″ in length. Converts inside diameter of any of our mounts (or wheel stand) from 3.0″ to 2.5″ to fit a 15′ or LT Titan Telescoping Flagpole.

Red cap for Titan ground sleeve. The 2.5″ cap is for the 15′ and 20’LT poles. The 3.0″ cap is for the 20′ & 25′ poles.

Mounting screws for telephone pole brackets. Stainless Steel, so they won't rust or adversely react with the brackets.

These AA rechargeable batteries are specifically made for the “Titan Solar Light”. These are the exact replacement batteries that were installed originally.

A strong and sturdy means of securing a loop in a flagpole cable. Requires a tool for application.